Hex Inception user guide

Version: 1.0.6
Product: Hex Inception (AUv2/VST3)
Platform: macOS
Primary use: Supplying an eight-channel hexaphonic audio source to a hosted multichannel plug-in inside a DAW.


1. Overview

Hex Inception is a macOS plug-in designed for eight-channel hexaphonic audio workflows.

It solves a specific routing problem: a hardware device may expose all of its hexaphonic channels correctly to macOS, while the DAW does not provide a practical eight-channel input path to the plug-in that needs them.

Hex Inception acquires or receives the eight-channel source itself, passes that source to a compatible multichannel plug-in hosted inside Hex Inception, and returns the hosted processor's output to the DAW.

Typical signal paths are:

Direct:
Hex audio device → Hex Inception → hosted plug-in → DAW

Reamp / Resynth:
DAW → Hex Inception 8ch → Hex Inception → hosted plug-in → DAW

A common use case is feeding a BOSS/Roland-style hexaphonic USB source to a processor such as MIDI Guitar 3 Hex.

Hex Inception does not require device-specific BOSS awareness. In Direct mode, it works from the capabilities reported by Core Audio.


2. What Problem It Solves

Many hexaphonic systems expose eight audio channels over USB:

  • 2 × direct / DI channels
  • 6 × individual string channels

The audio device may provide all eight channels, but a DAW may expose only stereo or another unsuitable plug-in input layout.

Hex Inception works around that restriction by providing its own eight-channel source path to the plug-in hosted inside it.

This allows an eight-input processor to operate without depending on the DAW being able to feed that processor eight hardware input channels directly.


3. Requirements

Direct workflow

You need:

  1. An Intel or Apple Silicon Mac running macOS 13 Ventura or later. Your DAW, hosted plug-in and hardware driver may require a later version.
  2. Hex Inception installed in AUv2 or VST3 format.
  3. A physical Core Audio input device with at least six usable input channels. The dedicated Hex Inception 8ch virtual device is reserved for Reamp / Resynth.
  4. A compatible multichannel plug-in to host inside Hex Inception.

Reamp / Resynth workflow

You also need:

  1. The Hex Inception 8ch virtual audio device installed and available to macOS.

If the hosted processor generates MIDI, configure an appropriate MIDI destination in Hex Inception and the receiving DAW or application.


4. Direct and Reamp / Resynth

The source mode is selected with the:

Direct | Reamp / Resynth

control.

Direct

Use Direct when the source is a physical audio device.

Signal flow:

Physical hex device → Hex Inception → hosted plug-in → DAW

Typical uses include:

  • playing a hex guitar in real time
  • live MIDI Guitar 3 Hex tracking
  • hexaphonic audio processing
  • recording the hosted processor's result
  • generating MIDI from a live performance

In Direct mode, Hex Inception lets you select the physical source device and physical buffer.

Reamp / Resynth

Use Reamp / Resynth when the eight-channel performance has already been recorded and you want to process it again.

Signal flow:

DAW playback → Hex Inception 8ch → Hex Inception → hosted plug-in → DAW

Typical uses include:

  • re-tracking MIDI from a recorded hex performance
  • trying different tracking settings
  • changing the hosted processor after recording
  • resynthesising a performance without replaying it
  • comparing processor settings using the same source material

Reamp / Resynth accepts a Core Audio input with at least eight usable channels. Select Hex Inception 8ch, or the aggregate that contains it, and map the returned channels in Routing. The dedicated virtual device is the usual reprocessing source.


5. The Eight-Channel Format

Hex Inception presents eight logical input slots to its hosted processor. Direct mode accepts hardware with at least six usable input channels; Reamp / Resynth requires at least eight. Use Routing to assign the available hardware channels to the logical inputs.

A common layout is:

Channel Typical source
1 DI / normal pickup L
2 DI / normal pickup R
3 Hex string channel
4 Hex string channel
5 Hex string channel
6 Hex string channel
7 Hex string channel
8 Hex string channel

The logical order is DI / Auxiliary 1, DI / Auxiliary 2, then String 1–6. Physical channel numbers and high-to-low string order depend on the source device; assign them in Routing rather than assuming the table describes every device.

Hex Inception does not assume that every manufacturer's labels or string order are identical. Use the Routing section and the channel meters to verify what is reaching each hosted input.

Direct-device eligibility

The Direct device selector is intended for devices that can provide the required multichannel source.

Devices with fewer than six input channels are not presented as normal Direct-source choices.


6. Supported Sample Rates

Hex Inception supports:

  • 44.1 kHz
  • 48 kHz
  • 88.2 kHz
  • 96 kHz

192 kHz is not supported.

48 kHz is the normal default for the Hex Inception 8ch virtual device, but a different supported rate may be required by the physical device or DAW project.

The physical device, DAW and Hex Inception workflow must operate at compatible sample rates.


7. Physical Buffer Sizes

The Direct buffer selector contains:

  • 16 frames
  • 32 frames
  • 64 frames
  • 128 frames
  • 256 frames
  • 512 frames

A fresh/default Hex Inception state selects:

128 frames

If the selected physical device cannot support one of the available choices, that choice may remain visible but unavailable.

Hex Inception distinguishes between the buffer you requested and the buffer actually accepted by the physical device. Diagnostic information should be treated as authoritative when checking the actual operating buffer.

Choosing a buffer

Buffer General use
16–32 Minimum-latency operation where the hardware and session remain stable
64 Low-latency performance
128 Default starting point
256 Heavier sessions or additional safety margin
512 Latency-insensitive processing or troubleshooting

Use the smallest buffer that remains completely reliable on the actual hardware and session.


8. Basic Setup — Direct

1. Connect the source device

Connect and power on the hex-capable audio device.

Confirm that macOS can see it before troubleshooting Hex Inception itself.

2. Insert Hex Inception

Open the DAW project and insert Hex Inception on the track where you want to receive the hosted processor's output.

3. Select Direct

Select:

Direct

in the Direct | Reamp / Resynth control.

4. Select the device

Choose the required physical source from the device selector.

Only suitable multichannel input devices are intended to appear here.

5. Select the buffer

Choose the required physical buffer.

For a first test, 128 frames is a sensible starting point.

6. Select the hosted plug-in

Hex Inception must be stopped before changing the hosted processor.

Use the plug-in selector in the Hosted Plug-in section to choose the compatible multichannel processor you want to use.

When a processor is loaded, the Hosted Plug-in section identifies it and shows information such as its manufacturer, format, input/output count and running state.

A saved project/session restores its hosted plug-in and hosted state when that plug-in is still available.

7. Check Routing

Review the Routing section before starting audio.

Do not assume that a manufacturer's channel labels necessarily match the order expected by the hosted processor.

8. Start input

Use Start Audio Input.

When reception is running, the primary status changes to:

Receiving

When it is not running, the status is:

Stopped

9. Verify all channels

Play each string or source independently.

Confirm that:

  • the expected source meter responds
  • the expected hosted input responds
  • no string appears on an unintended input
  • no required channel is missing
  • the hosted processor produces the expected output

Do this before an important recording session, especially when using a new device or hosted processor.


9. Basic Setup — Reamp / Resynth

Reamp / Resynth processes an already-recorded eight-channel performance.

1. Preserve the eight discrete channels

The original hex source must remain discrete.

Do not collapse the six string channels to stereo if you intend to reprocess them later.

2. Send the recording to Hex Inception 8ch

Install the optional Hex Inception 8ch audio-driver component from the macOS installer if it is not already available. In macOS Audio MIDI Setup, create an Aggregate Device containing your normal audio interface and Hex Inception 8ch. Match the component sample rates, choose the appropriate hardware clock source and enable drift correction for the other component as needed.

Select the aggregate in your DAW so it can access both your normal monitoring outputs and the virtual device. Check its channel list: the Hex Inception 8ch channels may have an offset in the aggregate. Send only the recorded source tracks to those eight virtual outputs; keep the processed return on your normal monitoring outputs to avoid a feedback loop.

In the DAW, route the eight recorded channels to the corresponding outputs of:

Hex Inception 8ch

Maintain the intended eight-channel order.

3. Select Reamp / Resynth

In Hex Inception, select:

Reamp / Resynth

Select Hex Inception 8ch, or the aggregate containing it, as the reamp input. An aggregate must expose at least eight usable input channels. Verify the virtual channels and their offsets in Routing.

4. Select or recall the hosted processor

While stopped, use the Hosted Plug-in selector if you need to choose a different processor.

If the DAW project already contains a saved Hex Inception state and the processor is installed, Hex Inception should recall the saved processor and its state.

5. Review Routing

Check the Routing section and confirm that the eight returned DAW channels correspond to the hosted processor's expected inputs.

6. Start processing

Start the Hex Inception input path and play the DAW session.

The recorded eight-channel performance can now be presented to the hosted processor as a reprocessing source.

Record or monitor the resulting audio and/or MIDI in the DAW.


10. Hosted Plug-in

Hex Inception hosts one processor that receives the eight-channel source.

The Hosted Plug-in section is used both to choose the processor and to show the currently loaded processor.

When loaded, the interface provides a compact summary such as:

  • plug-in name
  • manufacturer and format
  • input and output count
  • running state

For example:

8 inputs · 2 outputs · Running

Changing the hosted processor

Stop Hex Inception before choosing another hosted plug-in.

Project recall

Hex Inception saves the hosted processor identity and hosted state with the project/session. Hex Presets also lets you save and recall complete setups, including routing, the hosted plug-in and its state. Existing full-setup presets retain their saved MIDI destination.

When reopening the project, the saved processor should be restored automatically when it remains installed and available.

If the saved plug-in is unavailable

If Hex Inception reports that no plug-in is loaded or that the saved processor cannot be restored:

  • stop audio input
  • confirm the required AU/VST3 is installed
  • select an available compatible processor
  • verify Routing before restarting audio

A missing processor should not be silently replaced with an unrelated one.


11. Routing

The Routing section describes how the eight source channels are presented to the hosted processor.

The source is determined by the selected mode:

  • Direct: the selected physical input device with at least six usable inputs
  • Reamp / Resynth: the selected input with at least eight usable channels, normally Hex Inception 8ch or an aggregate containing it

Verify routing by signal, not by assumption

When using a new source device or processor:

  1. Play or send one source channel at a time.
  2. Watch the source/channel meters.
  3. Observe which hosted input receives it.
  4. Check the corresponding entry in Routing.
  5. Repeat until the six required string channels and any available DI / auxiliary channels are accounted for.

This is particularly important with hexaphonic hardware because manufacturer channel labels and string order can differ.


12. Changing the Direct Input Device

To change the physical source:

  1. Stop audio input.
  2. Select Direct.
  3. Choose the replacement device.
  4. Choose the required buffer.
  5. Review Routing.
  6. Start audio input again.
  7. Verify the six required string channels and any mapped DI / auxiliary channels.

Device and buffer changes should be made while Hex Inception is stopped.

After changing hardware, do not assume that the previous manufacturer's channel order applies to the replacement device.


13. Operating Status

Receiving

Receiving means Hex Inception is actively receiving the selected source. Verify the required string channels with the meters; DI / auxiliary channels are optional.

Stopped

Stopped means the external/source input path is not currently running.

Some configuration changes require Hex Inception to be stopped. Follow the guidance shown in the interface if a selector is unavailable while Receiving.

No Plug-in Loaded

If no hosted processor is selected, Hex Inception reports that state rather than pretending processing is active.

Audio reception, channel information and routing can remain useful for configuration and diagnosis, but there is no hosted processing result until a compatible processor is loaded.


14. Channel Meters

Use the channel meters to answer:

  • Is the source reaching Hex Inception?
  • Are all six required string channels and the available DI / auxiliary channels present?
  • Does each string/source appear on the expected source channel?
  • Is one channel unexpectedly silent?
  • Is the channel order different from what the processor expects?

For a new device, excite one source at a time.

For a six-string hex source, play each string separately and note which of the eight channels responds.


15. MIDI Output

A hosted processor can generate MIDI from the incoming audio. In Hex Inception 1.0.6, the MIDI Output selector offers four exclusive choices:

  • Host / DAW — returns generated MIDI directly through the AUv2 or VST3 plug-in to a compatible enclosing host.
  • Built-in virtual MIDI source — exposes Hex Inception as a system MIDI source for a DAW or another application.
  • External MIDI destination — sends to the selected system MIDI destination.
  • Off — disables MIDI output.

Host / DAW setup

New plug-in instances default to Host / DAW. Existing projects and full-setup presets keep their saved MIDI destination. To use host output in an existing project:

  1. Select MIDI Output → Host / DAW in Hex Inception.
  2. Enable MIDI generation in the hosted processor.
  3. In the enclosing DAW or plug-in host, route Hex Inception's MIDI output to the receiving instrument or track.
  4. Enable monitoring or recording on the receiving track as required by that host, then test notes and note release.

Host MIDI routing and recording support vary by DAW and plug-in format. In Blue Cat Audio Axiom, a direct internal Port A–P connection can feed a receiving instrument that processes after Hex. Test the selected connection in your own session.

Host / DAW does not simultaneously send to virtual or external destinations. Choose one output path to avoid duplicate notes. Generated MIDI retains its sample offsets, but the host and plug-in format determine which expressive MIDI and SysEx messages reach the receiver; verify MPE behavior with your chosen host and instrument.

Virtual and external MIDI

Use the built-in virtual source when your host cannot receive plug-in MIDI output, or when sending to another application. Select the Hex Inception MIDI source as the receiver's input. Only one Hex Inception instance can own the built-in source at a time.

For an external destination, select the intended system endpoint in Hex and configure its receiver. Multiple Hex instances can use an external destination where that destination permits it.

Standalone has no enclosing Host / DAW MIDI port. Select virtual or external output when using standalone.

Troubleshooting MIDI

Check the signal path in this order:

  1. Is Hex Inception receiving the correct audio?
  2. Is the hosted processor receiving the correct channel mapping?
  3. Is the hosted processor generating MIDI?
  4. Is the intended MIDI Output selected in this instance?
  5. Is the receiving DAW, host connection or application listening to that output?

In an older project, explicitly select Host / DAW if that is the path you intend to use; updating Hex does not replace a saved destination. If host output is unavailable, try the virtual source or a suitable external destination.

Stop, bypass and routing/destination changes request note cleanup. Host output can deliver cleanup only while the host continues calling the plug-in's audio processing callback. If a receiver holds a note after processing stops, use its panic/all-notes-off control and check the host's monitoring and routing settings.


16. Status Details and Diagnostics

Use Status Details and Diagnostics when you need to investigate a problem.

Depending on the current state, diagnostics can help confirm:

  • selected source mode
  • selected physical device
  • requested buffer
  • actual accepted device buffer
  • sample rate
  • channel activity
  • hosted processor state
  • routing state
  • MIDI output state

If something stops working, inspect the status information before changing several settings at once.


17. Troubleshooting

The physical device does not appear

Check that:

  • the device is connected and powered
  • macOS can see it
  • it exposes at least six usable input channels
  • Hex Inception is in Direct mode

Direct mode requires at least six usable hardware input channels; the dedicated Hex Inception 8ch device belongs in Reamp / Resynth.

Start Audio Input does not produce audio

Check:

  • the correct source mode is selected
  • the correct Direct device is selected, if using Direct
  • the required buffer is available
  • the device and project are using compatible sample rates
  • the main status changes to Receiving
  • the input meters show activity

No hosted processor is active

Stop Hex Inception and use the Hosted Plug-in selector to choose a compatible processor.

If the project previously used a plug-in that is no longer installed, reinstall it or choose another compatible processor explicitly.

A plug-in is loaded but does not receive the expected signal

Check:

  • its input count/layout
  • the Routing section
  • the channel meters
  • the physical device's actual channel order
  • whether you are using the correct source mode

A plug-in can load successfully while still being unsuitable for the required eight-channel input layout.

Only some strings are present

Possible causes include:

  • the hardware is not supplying all expected channels
  • the source channel order differs from what you expected
  • one DAW return channel is missing in Reamp / Resynth
  • the hosted plug-in is not exposing the required eight-input layout
  • the Routing section does not match the intended signal order

Strings appear on unexpected inputs

Identify the actual source order with the meters, then compare it with the Routing section and the hosted processor's expected inputs.

Avoid destructively changing the original recording until you understand the actual channel order.

Reamp / Resynth is silent

Confirm that:

  • Hex Inception 8ch is installed
  • Hex Inception is set to Reamp / Resynth
  • the DAW is sending audio to Hex Inception 8ch
  • all required output channels are being sent
  • the eight-channel order is correct
  • Hex Inception shows Receiving
  • a compatible hosted processor is loaded

Crackles or instability

Try a larger physical buffer in Direct mode.

For example:

32 → 64 → 128 → 256

Do not treat the smallest selectable buffer as automatically preferable.

A 192 kHz session does not work

192 kHz is not supported.

Use one of:

44.1 / 48 / 88.2 / 96 kHz


Before relying on Hex Inception in an important project:

  1. Create a new DAW project.
  2. Insert Hex Inception.
  3. Select Direct.
  4. Select the physical hex-capable source with at least six usable inputs.
  5. Use 128 frames initially.
  6. Select the intended hosted processor while stopped.
  7. Review Routing.
  8. Press Start Audio Input.
  9. Confirm the status shows Receiving.
  10. Test every string/source independently.
  11. Confirm all six required string channels and any available DI / auxiliary channels are accounted for.
  12. Confirm the hosted processor produces the expected result.
  13. Save the project.

This gives you a known-good reference configuration.


19. Project Recall

Hex Inception is designed to restore the important state of a saved DAW project.

That state includes the selected source configuration, explicit buffer choice, hosted processor and routing state.

The selected explicit buffer is preserved rather than being returned to 128 every time the project is opened.

The hosted plug-in and its state are also restored automatically when possible.

If required hardware or a hosted plug-in is missing, Hex Inception should report the unresolved condition rather than silently choosing an unrelated replacement.

Always check the visible status after reopening a project before recording.


20. Practical Workflow Advice

Live performance

Prioritise:

  1. correct source device
  2. correct eight-channel signal
  3. correct hosted processor
  4. correct routing
  5. stable buffer
  6. lowest practical latency only after the above are reliable

Recording

Where possible, preserve the original eight discrete hex channels.

This gives you the option to use Reamp / Resynth later rather than permanently committing to the tracking or synthesis result generated during the original performance.

Reprocessing

Keep the recorded source channels intact.

Use Hex Inception's source/routing workflow to present them correctly to the hosted processor instead of destructively altering the original performance files.


21. What Hex Inception Is Not

Hex Inception is not intended to be:

  • a general-purpose audio-interface control panel
  • a replacement for the DAW mixer
  • a universal arbitrary-channel patchbay
  • a conventional stereo effect
  • a 192 kHz processing system
  • a BOSS-device-specific manager

Its purpose is narrower:

Provide a reliable eight-channel hexaphonic source to a hosted processor when the surrounding DAW cannot conveniently provide that input itself.


22. Quick Reference

Direct

Physical hex device → Hex Inception → hosted processor → DAW

  1. Insert Hex Inception.
  2. Select Direct.
  3. Select the physical device.
  4. Select buffer.
  5. Select or confirm the Hosted Plug-in while stopped.
  6. Review Routing.
  7. Press Start Audio Input.
  8. Confirm Receiving.
  9. Play or record.

Reamp / Resynth

DAW → Hex Inception 8ch → Hex Inception → hosted processor → DAW

  1. Preserve the eight discrete recorded channels.
  2. Route them to Hex Inception 8ch.
  3. Select Reamp / Resynth.
  4. Select or confirm the Hosted Plug-in while stopped.
  5. Review Routing.
  6. Start the input path.
  7. Confirm Receiving.
  8. Process or record the result.

Supported sample rates

44.1 / 48 / 88.2 / 96 kHz

Direct buffer choices

16 / 32 / 64 / 128 / 256 / 512 frames

Fresh/default selection:

128 frames


23. Information to Include With a Support Report

Include:

  • macOS version
  • DAW and version
  • Hex Inception version
  • Hex Inception plug-in format
  • hosted plug-in name, format and version
  • Direct or Reamp / Resynth mode
  • physical source device, if using Direct
  • sample rate
  • requested buffer
  • actual accepted buffer, if relevant
  • MIDI output mode and destination, if relevant
  • which exact channels are affected
  • whether Hex Inception shows Receiving or Stopped
  • whether the problem occurs in a new empty project
  • relevant Status Details or Diagnostics

For channel problems, describe the observed mapping explicitly.

For example:

Source channel 5 reaches hosted input 7; source channel 7 is silent.

That is much more useful than reporting only that the strings are routed incorrectly.


24. Summary

Hex Inception provides a focused eight-channel audio path for hexaphonic processing on macOS.

Use Direct to receive an eligible physical device with at least six usable input channels.

Use Reamp / Resynth to receive a previously recorded eight-channel performance through Hex Inception 8ch.

Select the hosted processor while stopped, verify the Routing section, start the input path, and confirm Receiving.

The basic principle is:

Get all eight source channels to the intended hosted processor inputs reliably, without depending on the DAW to provide that eight-channel plug-in input itself.

Back to Hex Inception